BOBCAT Error Code Logo

Bobcat A770 C10D2-11 Error Code

C10D2-11 Fault Code Meaning :

Drive Pump reverse Short to Ground

Drive Pump Reverse - Circuit Short to Ground

C10D2-11 Error Code

Drive Pump Reverse - Circuit Short to Ground is the main cause of C10D2-11 error.The condenser converts gases into liquids, which expels heat from your rig. Materials can build up over time, causing a layer of dirt and grime to form on the condenser's coils. Your AC system will only blow hot air since the refrigerant fails to cool down.

Bobcat A770 Photo

Tip For A770 Model

There is a control lock sensor in the left console which deactivates the hydraulic control levers (joysticks) and the traction drive system when the control console is raised. The console must be in the locked down position for the hydraulic control levers (joysticks) and traction system to operate.

NOTE: If the control lock sensor does not deactivate the control levers and traction system when console is raised, see your Bobcat A770 dealer for service.

About | Contact | Privacy

Copyright © 2019 All rights reserved.

Bobcat Error Code

This website is not official or registered website. Please go official Bobcat website.

Sitemaps : 1-2-3-4-5