BOBCAT Error Code Logo

Bobcat A770 H7404 Error Code

H7404 Fault Code Meaning :

Gateway Controller No Communication

Main Controller No Communication

Main Controller No Communication

H7404 Error Code

Main Controller No Communication is the main cause of H7404 error.To solve H7404 locate and open the low-pressure valve, then attach the refrigerant to the valve and charge from there. Ensure you use the right refrigerant type and amount, as specified by a manufacturer. It is possible to overcharge the AC, so consider seeking help from a mechanic.

Bobcat A770 Photo

Tip For A770 Model

Before beginning operation, inspect the work area for unsafe conditions.

Look for sharp drop-offs or rough terrain. Have underground utility lines (gas, water, sewer, irrigation, etc.) located and marked. Work slowly in areas of underground utilities.

Remove objects or other construction material that could damage the excavator or cause personal injury. Always check ground conditions before starting your work:

- Inspect for signs of instability such as cracks or settlement.
- Be aware of weather conditions that can affect ground stability.
- Check for adequate traction if working on a slope.

About | Contact | Privacy

Copyright © 2019 All rights reserved.

Bobcat Error Code

This website is not official or registered website. Please go official Bobcat website.

Sitemaps : 1-2-3-4-5